View ER3A_4604516.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ER3A thru ER3J
SURFACE MOUNT SUPERFAST RECTIFIER
CHENG- YI
ELECTRONIC
VOLTAGE RANGE -50 TO -600 VOLTS CURRENT -3.0 Amperes
SMC/DO-214AB
FEATURES
For surface mounted applications Low profile package Built-in strain relief Easy pick and place Superfast recovery times for high efficiency Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated junction High temperature soldering: 260oC/10 seconds at terminals
.108(2.75) .128(3.25) .220(5.59) .245(6.22)
.260(6.60) .280(7.11) .006(.152) .012(.305)
.079(2.00) .103(2.62) .002(.051) .008(.203) .305(7.75) .320(8.13)
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Indicated by cathode band Standard Packaging: 16mm tape (EIA-481) Weight: 0.007 ounces, 0.21 gram
.030(0.76) .050(1.27)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, reistive or inductive load. For capacitive load, derate current by 20%.
SYMBOLS
ER3A
50 35 50
ER3B
100 70 100
ER3C
150 105 150
ER3D
200 140 200 3.0
ER3E
300 210 300
ER3G
400 280 400
ER3J
600 420 600
UNITS
V V V A
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at TL=75 C
0
VRRM VRMS VDC I(AV)
Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current at Rated DC Blocking Voltage
@ TA=250C @ TA=1000C
IFSM VF IR TRR CJ R JL TJ , TSTG
100
A
0.95 5.0 200 35.0 45.0 16 -50 to +150
1.25
1.7
V
A nS
pF
0
Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating and Storage Temperature Range
C/W
0
C
Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHZ and Applied Vr=4.0 volts. 3. 8.0mm2 (.013mm thick) land areas.
ER3A thru ER3J
SURFACE MOUNT SUPERFAST RECTIFIER
CHENG- YI
ELECTRONIC
RATING AND CHARACTERISTICS CURVES ER3A THRU ER3J
AVERAGE FORWARD CURRENT, AMPERES
Fig. 1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM ES1A THRU ES1G
50 Noninductive 10 Noninductive
Fig. 2 - MAXIMUM AVERAGE FORWARD CURRENT RATING
3.0 2.5 2.0 1.5 1.0 0.5 0 50 60 70 80 90 100 110 120 130 140 150 LEAD TEMPERATURE, oC
SINGLE PHASE HALF W AVE 60HZ RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS
trr
+0.5A
() PULSE GENERATOR NOTE 2
(+) 25 Vdc (approx) ()
D.U.T.
0 -0.25
1 NONInductive
OSCILLOSCOPE NOTE 1
(+)
NOTES:1. Rise Time=7ns max. Input Impedance=1 megohm. 22pF 2. Rise Time=10ns max. Source Impedance=50 Ohms.
-1.0 SET TIME BASE FOR 10ns/cm 1cm
Fig. 3 - TYPICAL REVERSE CHARACTERISTICS
1000 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
Fig. 4 - TYPICAL FORWARD CHARACTERISTICS
TJ=100 C
0
100
INSTANTANEOUS FORWARD CURRENT, AMPERES
100
10
0 TJ=75C
ER3A-ER3D
10
ER3A-ER3G ER3J
1.0
TJ=25C
0
1
0.1
0.1
0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK INVERSE VOLTAGE, VOLTS
0 TJ=25C PULSE WIDTH=300 S 2% DUTY CYCLE
0.01 0.4 0.6
0.8
1.0
1.2
1.4
1.6 1.8
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
Fig. 5 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT, AMPERES 200 100 90
CAPACITANCE, pF
Fig. 6 - TYPICAL JUNCTION CAPACITANCE
TJ=25C f=1.0MHZ Vslg=50mVp-p
0
100
75 50 45 30 15
50
8.3ms SINGLE HALF SINCE-WAVE JEDEC METHOD
10 1 5 10 50 100 0.1 0.5 1 2 5 10 20 50 100 200 500 1000
NUMBER OF CYCLES AT 60Hz
REVERSE VOLTAGE, VOLTS

▲Up To Search▲

Price & Availability of ER3A

	To Download ER3A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .